You've heard the term blown fuses, but what is this exactly? First, you need to know what fuses are and just exactly what they are designed to do. You see, your home's electrical wiring must be protected from short circuits and circuit overloads. This type of protection is in place to keep your home from having an electrical fire.
Your home is protected by either circuit breakers or fuses. Both circuit breakers and fuses are rated by the maximum amount of amps they are designed to trip or blow at. This predetermined amperage rating is clearly marked on both.
Standard sizes include, 15-, 20- and 30-amp fuses in the screw-in variety. These type of fuses screw into a socket, shaped very much like a light bulb socket. Edison based fuses (labeled with an "S", have a smaller screw-in base and it is called a rejection base. This menas that only the right sized fuse can be replaced in this type of base.
For instance, a 30-amp fuse will not make contact in a 20-amp Edison base, therefore it is fool proof. This is a great added safety measure to eliminate someone just putting an oversized fuse into a fuse socket to try and keep the fuse fro blowing. The real answer is to eliminate some of the load on the circuit instead until the fuses no longer blow.
The 15-amp fuse protects #14 or larger wire, the 20-amp fuse protects #12 or larger wire, and the 30-amp fuse protects #10 or larger wire.
If a circuit is overloaded, meaning beyond the preset amount of amps labeled on the fuse, the fuse blows (or opens the circuit) to protect the wires from breaking down and burning. To cure this problem, lighten the electrical load on the circuit by removing things connected to the circuit until the fuse holds.
Electrical shorts also cause fuse failure. An electrical short can be from the hot wire to ground or a hot wire to neutral. In either case, the fuse will open and shut the circuit off. To find this problem is a little more complicated, but start with the easiest solutions and work backwards to the fuse connection. Start by finding the affected circuit that is off and what is connected to it. The appliances, cords, and lighting connected to the circuit may have a short causing all of the problem.
Check cords and connections to se if you can find the problem. Next, unplug each item, one at a time, to see which is the problem with the short. Not every problem will be solved this easily though. It may be a wire in the attic or basement that a mouse chewed that is causing a short. Maybe it is insulation on a wire that has crumbled and now the baer wire is touching a grounded box? If you cannot find the problem on your own, don't hesitate to call in a professional electrician to help you find the shorted circuit.